Chip 1998 February/CHIP Şubat 1998.iso/drivers/SESK/imwave16/INSTALL.DAT

Text File | 1995-10-10 | 12KB | 458 lines

//--------------------------------------------------------------------
//
// INSTALL on-line Help Text File
//
// Help Customization Guidelines:
//
// 0) Comment lines start with leading '//'.
// 1) Help Message Text starts with #MESSAGE statement
// 2) Never change the number after the #MESSAGE statement. That is
//    the search Message ID for the INSTALL program.
// 3) LINES statement defines how many (lines) x (characters) allowed.
//    Never exceed this limits when you type the text for the message.
// 4) TITLE statement defines the sub-Title of this message.
//    (allow to modify for your customization)
// 5) Text area starts and ends with a '$'.
//    (allow to modify for your customization)
// 6) the INSTALL program is not going to format your
//    text. It just show whatever text you typed here
//    line by line. So you have to do the formatting for
//    better effect and please use SPACEs but not TABs.
//    (you don't need to enter trailing SPACE lines. If there is space
//     left at the bottom of a HELP message, white space is the default.)
// 7) Anyway, give a try and see how it goes.
//
// 9) Format Overview (example)
//
//    #MESSAGE = 1                         // starts Help message 1
//    TITLE="Selcet CD-ROM Type"        // sub-title of this message
//    LINES=9x50                        // allowed text area:
//                                      // 9 lines x 50 characters
//    $                                    // starts text area
//    TEXT LINEs
//    TEXT """"                            // help text
//    " " "
//    $                                 // end of text area
//-----------------------------------------------------------------

//
// INSTALL Help Text: Message by Message
//

#MESSAGE = 1
TITLE="W E L C O M E"
LINES=9x48
$
INSTALL is a complete installation
and test program for 82C924 sound card.
A mouse is recommended. If you do not
have a mouse, use the following keys:
  [TAB]       to move to option
  [ENTER]     to execute option
  []        to select option
  [F3]        to exit the installation
  [ALT+Key]   to activate a button
$

#MESSAGE = 2
TITLE="INSTALLATION OPTIONS"
LINES=6x52
$
This Installation will do the following:
- Install Drivers and Utilities for 82C924
- Configure and Test 82C924 sound card
- Install and setup CD-ROM drivers
- Let you view information file README.TXT
- Install audio applications from OPTi
$

#MESSAGE = 20
TITLE="TEST & CONFIGURATION OPTIONS"
LINES=6x52
$
The Test and Configuration program will allow you:
- Configure and Test your Sound Card
- Change CD-ROM settings and update system files
- Perform 8 bit, 16 bit and FM Music Sound Tests
- Change volume settings
- View information file README.TXT
$

#MESSAGE = 3
TITLE="USER DIRECTORY SELECTION"
LINES=4x48
$
Select the drive and enter the directory where
you would like to install your software to.
The required and available disk space for the
complete installation is listed below.
$

#MESSAGE = 4
TITLE="MS WINDOWS 3.1 DIRECTORY SELECTION"
LINES=6x48
$
INSTALLER needs to know where your Microsoft
Windows 3.1 directory is. If you do not have
Microsoft Windows 3.1 installed or you do not
want to install the audio device drivers and
applications for Microsoft Windows 3.1, you may
select [NONE].
$

#MESSAGE = 5
TITLE="CD-ROM SELECTION"
LINES=4x44
$
MAD16 Pro sound card can be used as a CD-ROM
interface board.  Select your CD-ROM drive
type or select [None] if you do not want to
connect the CD-ROM drive to the sound card.
$

#MESSAGE = 6
TITLE="CD-ROM DEFAULT SETTINGS"
LINES=5x44
$
Select [OK] if you want to accept the
default settings for your CD-ROM.

Select [CUSTOMIZE] if you want to customize
the I/O address, Interrupt and DMA channel.
$

#MESSAGE = 7
TITLE="CD-ROM HARDWARE CONFIGURATION"
LINES=5x48
$
Select [OK] if you accept the settings for your
CD-ROM.

Select [DEFAULTS] if you want to set the CD-ROM
to the default settings.
$

#MESSAGE = 8
TITLE="FILE COPY CONFIRMATION"
LINES=5x45
$
INSTALLER is going to start copying files to
your hard disk. Select [OK] to continue if
the following information is correct.

Select [CHANGE] if you want to make a change.
$

#MESSAGE = 11
TITLE="SOUND TEST"
LINES=4x36
$
Select a Sound Test option below.

Select [DONE] when test is done and
go back to the previous window.
$

#MESSAGE = 12
TITLE="SOUND TEST"
LINES=6x46
$
Sound test can not be run now.

The audio device resources are not available
or have been changed. The new audio
configuration will not take effect until it
is ACCEPTED. Please run sound test later.
$

#MESSAGE = 13
TITLE="Select MSCDEX.EXE For CD-ROM"
LINES=7x44
$
The following is MSCDEX(s) on your system. Please
select one compatible with your DOS version.

* For DOS/Windows 3.1, use the one which came
  with DOS.
* For Windows 95/DOS, use the one which came
  with Windows 95.
$

#MESSAGE = 14
TITLE="No MSCDEX.EXE in your system"
LINES=10x50
$
To use your CD-ROM Drive, you need the program
MSCDEX.EXE from Microsoft.  INSTALL has scanned
your hard disk(s) and did not find one. Besides,
your DOS version is very old. We don't have a
MSCDEX version good for you. INSTALL inserted a
MSCDEX line with leading 'REM' to the AUTOEXEC.BAT
anyway. If you locate a MSCDEX file later, please
copy it to the MAD16 Pro directory and remove the
REMark of MSCDEX line in AUTOEXEC.BAT .
$

#MESSAGE = 15
TITLE="SYSTEM FILES UPDATE"
LINES=7x48
$
INSTALLER is going to update your system files
CONFIG.SYS and AUTOEXEC.BAT.

Select [OK] if you want INSTALLER to make the
changes NOW or select [BACKUP ONLY] if you
want INSTALLER only to save the changes to
the backup files CONFIG.MAD and AUTOEXEC.MAD.
$

#MESSAGE = 16
TITLE="MS WINDOWS 3.1 SYSTEM FILES UPDATE"
LINES=7x46
$
INSTALLER is going to update your WINDOWS
3.1 system files SYSTEM.INI and MIDIMAP.CFG.

Select [OK] if you want INSTALLER to make the
changes NOW or select [BACKUP ONLY] if you
want INSTALLER only to save the changes to
the backup files SYSTEM.MAD and MIDIMAP.MAD.
$

#MESSAGE = 17
TITLE="WINDOWS 3.1 SOUND APPLICATION INSTALLATION"
LINES=5x46
$
INSTALLER has also installed Windows 3.1 sound
applications to your system. The sound
applications group and applet icons will be
shown on your screen when you run Windows 3.1
the very next time.
$


#MESSAGE = 18
TITLE="Installation Successful"
LINES=11x46
$
Installer has completed successfully. You
must reboot your system in order to run
sound applications. Select [REBOOT] now to
reboot or select [EXIT] to continue without
reboot.

Type "SNDINIT" at the DOS prompt to test and
reconfigure the 82C924 sound card settings
when necessary at a later time.

Thank you for using MAD16 Pro sound system.
$


#MESSAGE = 19
TITLE="Not Enough Conventional Memory Detected"
LINES=10x56
$
Your system has LESS THAN 500 KBytes of recommended
conventional memory. To run DOS games, you need at
least the recommended size above. It is also
recommended that this amount of memory be available
in order to successfully run this program. You can
increase your memory either by running a memory maker
program that comes with your operating system, or
remove any memory resident programs that resides in
the system memory. Do you wish to EXIT this program
and increase your system memory now?
$


#MESSAGE = 21
TITLE="MAD16 Pro Registration"
LINES=6x46
$
Now is a good time to register your 16-bit
sound card and receive the latest services
and support from your manufacturer. You must
register first in order to receive technical
support from your manufacturer.

$

#MESSAGE = 22
TITLE="W E L C O M E"
LINES=9x42
$
SNDINIT is the testing and configuration
program for 82C924 sound card. A mouse
is recommended. If you do not have a mouse,
you may use the following keys:
  [TAB]       to move to option
  [ENTER]     to execute option
  []        to select option
  [F3]        to exit the program
  [ALT+Key]   to activate a button
$

#MESSAGE = 23
TITLE="CD-ROM DRIVER INSTALLATION"
LINES=6x48
$
Installer does not have the CD-ROM driver for
your CD-ROM. Installer will only update the
the CD-ROM settings of the sound card in
CONFIG.SYS. Please run the installation program
from your CD-ROM manufacturer to install the
CD-ROM driver and MSCDEX program.
$

#MESSAGE = 24
TITLE="REBOOT SYSTEM"
LINES=5x49
$
Your CONFIG.SYS has been updated according to
the new settings for your CD-ROM. You must REBOOT
your computer in order for the new settings to
take effect. Select [OK] to REBOOT your computer.
Select [EXIT] to continue without reboot.
$

#MESSAGE = 25
TITLE="REBOOT SYSTEM"
LINES=4x46
$
Your BLASTER Environment Variable is updated
in your AUTOEXEC.BAT file. Some DOS games may
reference this variable for initialization
purposes. Do you wish to REBOOT your computer?
$

#MESSAGE = 26
TITLE="Error!"
LINES=2x48
$
Hardware Error Detected! Please reconfigure your
Sound Card's I/O Port, IRQ, or DMA settings.
$

#MESSAGE = 27
TITLE="Error!"
LINES=4x45
$
You have selected the same I/O Port setting
between your Audio, CD-ROM, or MPU-401
device. This will cause conflict on your
system. Please reselect a different I/O Port.
$

#MESSAGE = 28
TITLE="Error!"
LINES=4x47
$
You have selected the same IRQ settings between
your Audio, CD-ROM, Modem, or MPU-401 device.
This will cause conflict on your system. Please
reselect a different IRQ setting.
$

#MESSAGE = 29
TITLE="Error!"
LINES=4x47
$
You have selected the same DMA settings between
your Audio, and CD-ROM device. This will cause
conflict on your system. Please reselect a
different DMA setting.
$

#MESSAGE = 30
TITLE="Warning!"
LINES=3x48
$
You have selected Windows Sound System using IRQ
5.  Some DOS games that support Windows Sound
System may not work with this option.
$

#MESSAGE = 31
TITLE="CD-ROM DRIVER INSTALLATION"
LINES=7x48
$
The CD-ROM you selected can not be set up at
this time. The IDE CD-ROM device's required
resources, I/O address 170, 376 and IRQ 15 is
not avaiable in your system. Please check if
your system have a secondary CD-ROM controller
or another device that uses resource that may
conflict with the sound card CD-ROM interface.
$

#MESSAGE = 32
TITLE="PNP RESOURCE UPDATE"
LINES=5x48
$
Your sound card's PNP resource has been changed.
Select [OK] to update system PNP configuration.
The new settings for your sound card will not
be effective until the system is rebooted.
$

#MESSAGE = 33
TITLE="PNP RESOURCE UPDATE"
LINES=6x47
$
Your CONFIG.SYS has been updated according to
the new settings for your CD-ROM.  Your sound
card PNP resource has also been changed.
Select [OK] to update system PNP configuration.
The new settings for your sound card will not
be effective until the system is rebooted.
$

#MESSAGE = 34
TITLE="INSTALLATION SUCCESSFUL"
LINES=11x48
$
Installer has completed successfully. Your
sound card's PNP resource has been updated
during the installation. You must reboot
your system in order to run sound applications.
Select [REBOOT] now to reboot.

Type "SNDINIT" at the DOS prompt to test and
reconfigure your sound card settings when
necessary at a later time.

Thank you for using MAD16 Pro sound system.
$

#MESSAGE = 35
TITLE="AUDIO DEVICE NOT ENABLED"
LINES=6x48
$
There is no proper audio resources assigned for
your sound card. To play DOS games or to run
Audio applications, resources must be assigned
to the audio device. Please check the audio
configuration to see if there is any conflict
with other devices on your system.
$

#MESSAGE = 36
TITLE="MODEM INTERFACE CONFIGURATION"
LINES=3x48
$
Your sound card supports a modem interface.
The current modem PNP settings are shown
below.
$

#MESSAGE = 37
TITLE="MODEM INTERFACE CONFIGURATION"
LINES=2x48
$
Your sound card supports a modem interface.
The current modem settings are shown below.
$